EPB-G Series Full Servo Electric CNC Press Brake
The EPB-G series is the smallest “all electric” servo driven press brake in the LZK-EPB electric press brake series. The C-series machines are equipped with 1 to 2 ball screws and use a “direct drive system” to manage the force. Each ball screw is capable of generating approximately 25 tons of force. By using these ball screws in a “direct drive system”, our electric press brakes are very affordable compared to traditional small hydraulic press brakes.
Machine frame processing
A large floor boring and milling machine is used to process the bending machine frame as a whole.
100% electric, no hydraulic oil required
The servo system uses 100% electricity instead of hydraulic oil and hydraulic components, reducing pollution.
Upper and lower mold standard segments
The mold segments are 10, 15, 20, 30, 50, 100, 300 (cm), and the user can customize the length.
Professional CNC system
The ESA S640 controller is used by default, and users can customize it.
Electromechanical deflection compensation (optional)
Input plate thickness and length parameters in the digital system, and the system will automatically perform deflection compensation.
High-precision backgauge structure
Using ball screw and linear guide rail, driven by servo motor, the positioning of back gauge is fast and accurate.
Energy saving, environmental protection, high precision
Can save 50% energy, environmental protection, fast bending speed, short response time
Angular Programming | Graphics Programming
The user can directly program the angle, and each step of the process can be a precise bending machine.
Video
Machine frame machining | electro-hydraulic synchronous structure | Delem CNC system | angle programming | PLC control | automatic pressure calculation | finger height
PRESS BRAKE
LZK | The new generation of ESA S640 control system makes complicated work easy
The ESA S640 control system is mainly used in all-electric servo bending machines. It has powerful functions, rich built-in resources, and has the advantages of safety, high efficiency, energy saving, and environmental protection.
PRESS BRAKE
LZK | Dual servo main motor control, fast response, low failure
The EPB bending machine adopts the principle of dual servos, and the Y1 and Y2 axes are controlled by powerful SYNTEC servo motors.
This design achieves the highest speed and precision and ensures extremely low operating costs.
PRESS BRAKE
LZK | A variety of mold options to match various bending workpieces, with higher precision and faster speed
A variety of molds can be selected to adapt to the production of various workpieces, so that the bending angle of the bending machine is more accurate and the work efficiency is higher
PRESS BRAKE
LZK | Reliable Electrical Systems
Open the door and cut off the power, high-quality SYNTEC servo motor drive, electrical components.
PRESS BRAKE
LZK | 4-axis precision fast backgauge
High-precision four-axis back gauge is adopted. It is driven by servo motor, ball screw and linear guide to ensure high-precision operation. Beam height is adjusted by CNC.
PRESS BRAKE
SPB-C series
LZK |Mechanical table compensation mechanism (optional)
It is made of high-strength steel and has a non-linear corrugated block structure. Driven by a motor, the compensation amount can be adjusted precisely.
PRESS BRAKE
LZK | DSP laser protection device
The Italian DSP laser protection device, the DSP laser safety protection device fully protects the personal safety of the bending machine operator and avoids the danger caused by the rapid movement of the slider on the machine tool. A block-shaped protection area is formed for the bending tip to protect the front, middle and rear areas of the tip. The protection area is fixed under the tool tip and moves synchronously with the mold, which ensures that any object below must enter the protection area generated by DSP before touching the tool tip when the mold moves down at high speed. Once an obstruction (such as a worker’s finger) enters the DSP protection area, the DSP will immediately send a signal and interrupt the downward movement of the slider.
Want to get the price of our press brake?
Get in touch with our team of experts to receive professional suggestions.
Technical Specifications
| Name | Model/Manufacture |
|---|---|
| CNC System | ESA S860 SYNTEC(10T-40T) LZ80T(65T-100T) |
| Y axes servo motor | SYNTEC SNAYO |
| Backgauge servo motor | SYNTEC Fuji,Japan |
| Compensation | Mechanical compensation(Standard equipment for models of 2,500 m m and above) |
| Electrics | France Electrics |
| Pedal Switch | South Korea KACON |
| mold | Standard 202 Frame knife, Double V same core / single V lower mode |
