LZK-NVL series CNC vertical V groover machine

Easy to use and stable quality V groover machine
LZK-NVL series CNC vertical sheet metal slotting machine

LZK-NVL series CNC vertical V groover machine. This machine tool adopts advanced CNC system with novel design. It has the characteristics of high processing precision, simple operation, low noise and no vibration. This machine tool is used to make V-shaped grooves, U-shaped grooves and other irregular grooves on sheet metal parts (including stainless steel plates, aluminum plates, aluminum-plastic plates, copper plates, iron plates, bakelite plates, acrylic plates and other special plates.) It is especially suitable for V groove processing of sheet metal parts before bending.

LZK | Frame structure bed and beam

It adopts frame structure design, after welding, it is tempered, and the large CNC gantry machining center is integrally processed, with good stability and small deformation. The crossbeam is fixed, and the workpiece is sent into the working table by the feeding mechanism and can be replaced. Ensure that the flatness of the worktable is within ±02mm.

groover machine detail photo

LZK | Slotting machine control system

The slotting machine control system adopts CNC numerical control, touch screen operation, easy to learn and understand for operators, and accurate positioning.

groover machine detail photo

LZK | Double turret structure

It adopts a double tool holder structure, and 8 cutting knives are installed on the two tool holder bodies at the same time. The maximum cutting depth is 1mm, which is 3 times the efficiency of traditional equipment. (Note: It can also work back and forth in both directions)

groover machine detail photo

Liangzhi LZK | Fully hydraulic clamping and pressing device

LZK-NVL type grooving machine parts are fixed by hydraulic clamping system, the grooving speed is fast and strong clamping is guaranteed. The hydraulic system is equipped with accumulator compensation and overflow valve, and the motor works in gap mode, which saves energy and ensures the safety of the hydraulic system.

The workbench is made of carbon tool steel, and the hardness reaches above HRC55 after quenching. Therefore, the wear of the workbench is small and the surface can be replaced, which prolongs the service life of the equipment.

groover machine detail photo
groover machine detail photo

LZK | Rack and pinion drive system

High-speed alloy steel rack and pinion, large-pitch ball screw, and high-precision, silent linear guide. The spindle system is driven by a high-torque servo motor coupled with an imported star reducer.

groover machine detail photo
groover machine detail photo
 
Scroll to Top
Scroll to Top

Successfully

Thanks, our company will contact you!